Kx-Td Series Pbx Programming For Inband Integration; Kx-Td Series Pbx Programming Via The Manager's Extension; Kx-Td Series Pbx Programming Via The Operating And Maintenance Tool - Panasonic KX-TVA50 Installation Manual

5.5 KX-TD Series PBX Programming for Inband
Integration
For KX-TD500 programming, refer to 5.6 KX-TD500 PBX Programming for Inband Integration.
DPT Integration is recommended when using the VPS with the KX-TA1232, KX-TD816, or KX-TD1232,
however, Inband Integration is necessary when the software version of the PBX does not support DPT
Integration.
Programming procedures and availability may vary by PBX model, software version, etc. Refer to the
documentation included with the PBX or consult your dealer for more information.
5.5.1 KX-TD Series PBX Programming via the Manager's
Extension
For KX-TD500 programming, refer to 5.6 KX-TD500 PBX Programming for Inband Integration.
Select a maximum of 2 extension ports to be connected to the VPS. Plug each extension into a Voice Mail
port.
Go to System Program [602] and assign the Voice Mail extensions to a different extension group. By default,
all extensions are in Extension Group 1.
Go to System Program [106] and assign the new Extension Group to Automated Attendant (AA).
5.5.2 KX-TD Series PBX Programming via the Operating and
Maintenance Tool
For KX-TD500 programming, refer to 5.6 KX-TD500 PBX Programming for Inband Integration.
1.
Go to the Main Menu. Select System Data Programming (BATCH [1] or INTERACTIVE [2]).
•
Before choosing BATCH, you must open a file in the Disk File Management Menu (Item 3).
•
Before choosing INTERACTIVE, you must connect with the system in the DSHS Connect/
Disconnect menu.
Main Menu
1. System Data Programming (BATCH)
2. System Data Programming (INTERACTIVE)
3. Disk File Management
4. DSHS Management
5. DSHS Connect/Disconnect
6. Quit
Select the number : [ ]
2.
Select Station from the System Data Programming Main Menu.
3.
Select Station Setting or Station Setting 1 from the Station Menu.
4.
Enable XDP ports. Additionally, you may need to place Voice Mail extensions in an Extension Group.
5.
Return to the System Data Programming Main Menu. Select System.
6.
Select Miscellaneous from the System Menu.
7.
Select the Call Hunting extension group. Set the Extension Group set in step 4 to [A] for Automated
Attendant.
8.
Return to the System Data Programming Main Menu. Select Line, then select CO Line Setting 1.
9.
Program all lines DIL to the first extension of the Voice Mail hunt group.
Document Version 3.0 2010/06

5.5.2 KX-TD Series PBX Programming via the Operating and Maintenance Tool

Installation Manual 149