Panasonic KX-TVA50 Installation Manual page 154

5.6 KX-TD500 PBX Programming for Inband Integration
Example Settings (2)
Program the PBX to direct incoming trunk (CO line) calls to an operator, and to then direct those calls to the
VPS when the operator does not answer.
1.
Program the PBX so that incoming trunk (CO line) calls are directed to an operator (DIL feature).
a.
Go to the 4-1 Trunk Line screen.
b.
Assign the Destination for each time mode and trunk (CO line) to a specific extension number.
c.
Click Apply to save the changed data.
Note
•
Specify the FDN for the extension group to which Operator has been assigned.
2.
Program the PBX so that unanswered calls to the operator are redirected to the VPS (Intercept Routing
No Answer feature).
a.
Go to the 3-1 Trunk Group screen.
b.
Assign the Intercept Destination for the trunk (CO line) group for each time mode.
c.
Click Apply to save the changed data.
154 Installation Manual Document Version 3.0 2010/06