Menu selection
CLIP screen
Names of the recorded clips and their durations appear on
this screen. The clip deletion method is selected on the
screen.
1
2
1 2 3 4 5 6 7 8
0 0 : 0 0 : 0 0 : 0 0
1
D E L
C L R
3
4
1 CLIP ID
The CLIP ID display is changed by the [#] (up) or [2]
(down) keys.
2 DUR
The duration of the clip whose CLIP ID is displayed
appears here.
3 DEL
The CLIP ID displayed will be deleted.
4 CLR
All the CLIP IDs will be cleared.
5 BACK
Operation will return to the menu selection screen.
Use the [1] (right) or [!] (left) keys to move the cur-
sor and select DEL, CLR or BACK.
LOG screen
Errors and warnings are displayed on this screen.
1
2
1 1 : 1 1 : 1 1
T E M P E R R
S I L N T
3
1 Time occurred
The time at which the error occurred appears here.
2 Error name
The name of the error appears here.
<Note>
For details, refer to the error table (page 19).
3 SILNT
This is set when the alarm beep is to be muted when an
error has occurred.
4 BEEP
The alarm sounds when an error occurs.
When the SET key is pressed, operation returns to the
menu selection screen.
B A C K
5
1
B E E P
4
SETUP screen
The setup menu settings are performed on this screen.
[ U S E R - S E T U P ]
H D P B F M T
1 0 8 0 / 2 4 P
1
2
USER: The parameters are set.
1 Menu item
The menu item display is changed using the [#] (up) or
[2] (down) key.
2 Parameter
The settings in the parameters can be selected using the
[1] (right) or [!] (left) key.
If the SET key is pressed until "COMPLETE" appears
after a setting has been selected, the setting will be
saved.
<Note>
For details, refer to the setup menu on page 13.
CLOCK: The unit's internal PC clock is set. Use the [1]
(right) or [!] (left) key to move the item to be
changed, and change the numerical value using
the [#] (up) or [2] (down) key.
Operation is returned to the SETUP screen by the
CANCEL key.
[ C L O C K ]
< 0 2 / 0 4 / 1 1 0 0 : 0 0 : 0 0 >
BACK: Operation returns to the menu selection screen.
VER screen
The version of the software program used appears on this
screen.
[ V E R S I O N ]
A P P
V e r . 1 . 0 2
APP
Ver.x.xx Application
FRNT Ver.x.xx Front panel (FPGA)
PCII
Ver.x.xx PCI I/F (FPGA)
UPCN Ver.x.xx Format converter (FPGA)
DVCC Ver.x.xx DVC control (FPGA)
DWNC Ver.x.xx Down-conversion
11 (E)