Table of Contents
Advertisement
Menu selection
HDD screen
On this screen, some data is saved into a part of the hard
disk drive's memory that is free and then loaded to check
that the drive is working properly.
H D D V e r i f y S TA R T O K ?
1
Y E S
<Note>
When no clips have been recorded, it takes about 80 min-
utes to check that the hard disk drive is working properly.
END screen
All the unit's operations are shut down on this screen.
1.
In the MENU mode, press the [1](right) key to move the
cursor to END (shutdown).
2.
Press the SET key.
3.
The following message now appears.
Select YES.
<Note>
Keep pressing both the SHIFT key and the [2] (down)
key for more than 2 seconds and a shutdown confirma-
tion message will appear on END screen of this unit.
[ E N D ]
1 Y E S
4.
Press the SET key.
5.
The following message now appears.
[ E N D ]
Wai t a m o me n t. .. .. .
6.
Upon completion of shutdown, the following message
appears.
P l e a s e t u r n o f f
P o w e r s w i t c h !
7.
Set the power switch to OFF.
12 (E)
N O
N O
3 9
Advertisement
Table of Contents
