Table of Contents
Advertisement
Parts and their functions
Front panel
1
2
3
1 POWER switch
After the unit's operation has been shut down properly,
set this switch to the OFF position. If the power is turned
off while the unit is operating, the data may be destroyed
or the hard disk drive may malfunction.
2 WARNING lamp
This flashes when an error or warning has occurred. For
details, refer to the error table (page 19).
3 HDD lamp
This lights when the hard disk drive is being accessed.
4 REW key
Press this to search backward through the recorded data
or search for a previous clip. To search for a previous
clip, press the REW key and SHIFT key at the same time.
5 STOP key
Press this to stop the unit's operation.
6 FF key
Press this to search forward through the recorded data or
search for a subsequent clip. To search for a subsequent
clip, press the FF key and SHIFT key at the same time.
7 PLAY key
Press this to play back recorded data, switch to the V-V
mode or record new data. To record new data, press the
PLAY key and REC key at the same time.
POWER
@
ON
OFF
4 5 6 7 8
REW
STOP
FF
PLAY
WARNING
HDD
PREV
NEXT
8 SHIFT key
9 REC key
: [#] (up) key
; [2] (down) key
< [!] (left) key
= [1] (right) key
> SET key
? CANCEL key
@ Display panel
?
:
CANCEL
<
=
;
>
REC
9
SHIFT
Press this to search for recorded data. To search for a
previous clip, press the REW key and SHIFT key at the
same time; to search for a subsequent clip, press the FF
key and SHIFT key at the same time.
Keep pressing both the SHIFT key and the [2] (down)
key for more than 2 seconds and a shutdown confirma-
tion message will appear on END screen of this unit.
Press this to record data or forcibly switch to the E-E
mode.
This is used to move the item to be shown on the display
panel upward.
This is used to move the item to be shown on the display
panel downward.
This is used to move the cursor or item to be shown on
the display panel to the left.
This is used to move the cursor or item to be shown on
the display panel to the right.
This is used to enter the item shown on the display panel.
This is used to restore the screen immediately before the
one now shown.
The basic screens and menu screens (page 10) appear
on this panel.
5 (E)
Advertisement
Table of Contents
