Connectors, Optional Pusb Expansion; Limited Power Source - Fujitsu 7000 F-Series User Manual

1.2.14 Connectors, Optional PUSB Expansion

The connectors with the PUSB Expansion option are located on the backplane of the controller,
identified below.
AC
Power
In

1.2.15 Limited Power Source

THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Chapter 1 - Overview
14 - TeamPoS 7000 F-Series Peripherals
USB
Split PS/2
Mic
(mouse/keyboard)
Audio
Cash
Line Out
drawer
GND
Cash Drawer
24V
(1 or 2)
PUSB
(usually
printer)
12V PUSB (VFD, Monitors,
or other 12V power)
Caution: The 24V powered USB port on the terminal does not meet
UL limited power source (LPS) requirements. This port is limited to
only allowing 24V Retail POS powered USB peripherals that do not
exceed a rated current of 4 Amps and are provided with a molded
plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
Caution: The 24V powered Cash Drawer port on the terminal does
not meet UL limited power source (LPS) requirements. This port is
limited to only allowing 24V Retail POS peripherals that do not
exceed a rated current of .2 Amps and are provided with a molded
plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
Displayport
USB
(x2)
TeamPoS7000_User Guide (F-Series)_D900000477.pdf
12V PUSB x5
PCI
Express
LAN
Unused
slot
VGA
out
TeamPoS
7000 User Guide