Fujitsu 7000 F-Series User Manual page 24

• If anything falls into the slot, use tweezers to remove it.
1. Slide a magnetic card through the slot on the right side. Hold the card lightly, and slide it in
the slot on the right side, paying attention to the direction of the arrow.
2. Move the magnetic stripe card in the direction of the arrow. Move the magnetic card from
the far end of the slot to the front.
3. Move the magnetic stripe card to the front of the slot and then remove it. When the
magnetic stripe card is read correctly, a confirmation beep sounds.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Chapter 3 - Basic Operations
22 - Using the (Optional) MSR
Data corruption:
Do not expose the magnetic card reader to strong magnetic fields, otherwise
the data may be lost.
NOTE: The MSR reader may not be able to read the magnetic stripe card
correctly if the movement of the card is stopped midway, if the card is
not moved at a constant speed, or if the card is not moved parallel to
the slot.
NOTE: If multiple beeps sound, retry the operation.
TeamPoS7000_User Guide (F-Series)_D900000477.pdf
TeamPoS
7000 User Guide