Adjusting The Displays; Displays (Lcd); Customer Display (Vfd); Using The (Optional) Msr - Fujitsu 7000 F-Series User Manual

3.3 Adjusting the Displays

3.3.1 Displays (LCD)

The displays are pole mounted. They display transaction and advertisement information to the
customers or operator. The LCDs can be swiveled and tilted backwards and forwards.

3.3.2 Customer Display (VFD)

The customer VFD display is mounted behind the LCD display. It displays transaction
information to the customer. The display panel of the VF70 customer display can be swiveled
through approximately 300 degrees. Both displays can be tilted backwards and forwards.

3.4 Using the (Optional) MSR

The magnetic card reader reads information written on the magnetic stripe of a magnetic card.
• Use only the specified magnetic card reader.
• Keep magnetic stripes clean. If a magnetic stripe is contaminated with dust, oil or water, this
may cause an error, result in a magnetic head fault, or degrade the performance of the
magnetic head.
• Do not lubricate the magnetic card reader.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
TeamPoS7000_User Guide (F-Series)_D900000477.pdf
Revision 1.0 - June 1, 2012
NOTE:
VF70
Chapter 3 - Basic Operations
Adjusting the Displays - 21