Execution And Screen Examples - GE MDS SD Series Technical Manual

User Data
Explanations
User Command
explanations
Screen Example
98

Execution and Screen Examples

Displayed information during reprogramming (at Root radios):
• (Percent Complete—Read-only): This parameter indi-
Progress
cates percent complete of a firmware upgrade. The calculation is
done each time a block of data is successfully transmitted or
received. Must be viewed on the
Command options available during reprogramming (at Root radios):
•
Stop Remote Reprogramming
for all remote nodes in the network. Inactive images on non-root
radios will be invalid. (No change to status of root radio images)
• —Manually send a reboot to all remote nodes in
Reboot Remote to
the network. All remote nodes will reboot to their image selected.
Command options available during reprogramming (at "Non-Root"
radios):
•
Stop Remote Reprogramming
for local radio. Inactive image will be invalid.
Figure 42 shows the radio's
Figure 42. Remote Reprogramming Screen
SD Series Technical Manual
Reprogramming
—Terminate remote firmware upgrade
—Terminate Remote Reprogramming
Screen.
Remote Reprogramming
MDS 05-4846A01, Rev. H
screen.