Device Reboot
Authorization Codes
84
•
—Shows the firmware package currently being used
Active Image
by the transceiver (1 or 2).
•
—Shows the version of firmware package 1.
Package 1
•
—Shows the version of firmware package 2.
Package 2
•
—Click this button to copy the currently active firmware to
Copy
the inactive image.
•
—Shows the firmware package currently being used
Active Image
by the transceiver (1 or 2).
•
—Shows the version of firmware package 1.
Package 1
•
—Shows the version of firmware package 2.
Package 2
•
—Allows selection of the firmware image to use when
Image
rebooting:
Current active Image, Image 1, Image 2, Inactive Image
•
—Initiates reboot of the radio with the selected firmware
Reboot
image.
This screen allows the entry of a new authorization key to change the
enabled features of the radio. The enabled features are not displayed
here, but can be viewed using a Serial/Telnet session, under the
menu.
zation Codes
•
—A factory furnished code used to enable operat-
Authorization Key
ing features of the transceiver. An error message is returned if an
invalid authorization key is entered. Contact your factory repre-
sentative for ordering details.
SD Series Technical Manual
.
Authori-
MDS 05-4846A01, Rev. H