Related Manuals for Philips AC4372
Summary of Contents for Philips AC4372
- Page 1 Always there to help you Register your product and get support at www.philips.com/welcome AC4372 Question? AC4374 Contact Philips User manual...
-
Page 2: Table Of Contents
Contents 1 Important Safety 2 Your air purifier Overview (for AC4372) Overview (for AC4374) 3 Get started Install filters 4 Use the air purifier Understand the air quality light Switch on Set the sensitivity of the air quality sensor Select the fan speed Set the timer... -
Page 3: Important
• power the appliance has poor you must have it replaced connections, the plug of the by Philips, a service center appliance becomes hot. Make authorized by Philips, or similarly sure that you plug the appliance qualified persons in order to into a properly connected avoid a hazard. - Page 4 The appliance is only intended installed before you switch on • for household use under normal the appliance. operating conditions. Only use the original Philips • Do not use the appliance in wet filters specially intended for this • surroundings or in surroundings appliance.
-
Page 5: Your Air Purifier
2 Your air purifier Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome. Philips VitaShield IPS technology and NanoCloud technology ensures you “Healthy air always”. VitaShield IPS technology effectively removes pollutants (ultrafine particles, allergens, bacteria and viruses) with size >0.02 micron including bacteria and virus*. -
Page 6: Overview (For Ac4374)
Overview (for AC4374) Touchscreen control panel Filter 2: Integrated Multi-care filter AC4138 Light sensor Filter 1: Pre-filter Air quality light Front panel Air quality sensor... -
Page 7: Get Started
Place your fingers in the recesses of the side panels and gently pull the top part of the front panel towards you. For AC4372, put the HEPA filter, activated carbon filter and multi-care filter back into the purifier. Lift the hooks at the bottom of the panel out of the bottom of the appliance. - Page 8 For AC4374, put the integrated Multi-care filter back into the purifier. Note • Make sure that the side with the tag is pointing towards you. Place the pre-filer in the appliance. Note • Make sure that the side with the two projections is pointing towards you, and that all hooks are properly attached to the appliance.
-
Page 9: Use The Air Purifier
4 Use the air Press the button to switch on the purifier. purifier Understand the air quality light Color of the air quality Air quality level light » The fan speed indicators Blue Very good (AUTO) and goes on. Dark purple good Purple fair... -
Page 10: Set The Sensitivity Of The Air Quality Sensor
Set the sensitivity of the air quality sensor To meet different needs when you use the appliance, we are offering you the opportunity to adjust the sensitivity of the air quality sensor. There are 3 sensitivity levels: • standard Press the buttons simultaneously. -
Page 11: Select The Fan Speed
To deactivate the timer function, press the Select the fan speed button repeatedly until the indicator ( , or ) is out. Note Activate child lock • After you change the sensitivity, the purifier automatically starts operating at the set sensitivity level whenever you switch on the purifier. -
Page 12: Night Mode
5 Clean your air Night mode purifier The purifier works in harmony with its surroundings. The purifier automatically switches to night mode in 3 minutes when the room in which it is operating becomes dark. All the lights • Before moving the purifier, make sure to unplug the purifier first. -
Page 13: Clean The Pre-Filter
6 Clean the pre- Note filter • When the humidity level in the room is very high, it is possible that condensation develops on the air quality sensor. As a result, the air quality light may indicate that the air quality is bad even though it is good. In this case you have to clean the air quality sensor or use one of Note the manual speed settings. - Page 14 Use a vacuum cleaner or wash the pre- Plug the air purifier into the power socket filter under a running tap. If the pre-filter is and press the button to switch on the very dirty, use a soft brush to brush away purifier.
-
Page 15: Replace The Filters
• Insert the filters in the correct position. • For AC4372, make sure you place the filters in the order of HEPA filter, the activated carbon filter, the multi-care filter, and then pre-filter. • For AC4374, make sure you place the filters in the order of integrated Multi-care filter, and then pre-filter. - Page 16 Remove all packaging material from the Put the pre-filter back into the purifier. new filters that need replacement. For AC4372, put the HEPA filter, activated carbon filter and multi-care filter back into the purifier.
-
Page 17: Reset Filter Lock
Press and hold the button for 3 deactive. See “Replace the filters” section to seconds to reset the filter lifetime. reset the filter lock. » For AC4372: , and go off. » For AC4374: go off. -
Page 18: Troubleshooting
This chapter summarizes the most common even though lowing order, starting with the problems you could encounter with the purifier. innermost filter: For AC4372: the purifier If you are unable to solve the problem with the has been HEPA filter (4), activated... -
Page 19: Guarantee And Service
9 Guarantee and service If you need information or if you have a problem, please visit the Philips website at www. philips.com or contact the Philips Consumer Care Center in your country (you will find its phone number in the worldwide guarantee leaflet). -
Page 20: Notices
One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. - Page 21 Save the user manual properly for future reference. © 2014 Koninklijke Philips N.V. All rights reserved. AC4372-4374_UM_EN_V2.0...