Headlamp Bulbs Replacement (Te-Smp); Rear Tail Light Bulb Replacement (Te-Smr) - Husqvarna SMR Owner's Manual

HEADLAMP BULBS REPLACEMENT (TE-SMR)
To gain access to the healamp bulbs, proceede as follows:
- remove the two fastening elastics (1) and the headlamp
holder;
- remove the two filaments bulb connector; (2) and the boot
(3)
- release the bulb holding spring (4) and then the bulb itself.
To replace the parking light bulb (5) extract it from the inside
cover.
After replacement, reverse operations for reassembly.
88
5
4
3
2
REAR TAIL LIGHT BULB REPLACEMENT
(TE- SMR)
Remove the two fastening screws (1) in the inner side of the
rear fender and the lens (2).