Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Server
  5. PRIMERGY RX200 S8
  6. System configurator and order-information manual

Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Manual

System configurator and order-information guide
Hide thumbs Also See for PRIMERGY RX200 S8:

Advertisement

Table of Contents

See also: Upgrade and Maintenance Manual
PRIMERGY RX200 S8
System configurator and order-information guide
February 2014
Contents
Instructions
Configuration diagram
Configurator
0
System software
I
Basic unit
II
Processor
III
IV
Graphics
V
VI
Drive Bay for 4x /8x 2.5" HD Basic Unit
VII
Modular Raid 0/1, Raid5 for 4x 2.5" / 8x 2.5" SAS or SATA HD's.
On-board Controller for 4x 2.5" SATA or SAS HD`s
VIII
4x or 8x 2.5" SAS / SATA Hard disk drives
IX
External SAS Disk Array, SAS backup drives or SCSI peripheral devices
X
XI
XII
XIII
XIV
PRIMERGY Server
4x 2.5" Hot-plug HDD or SSD
8x 2.5" Hot-plug HDD or SDD

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu PRIMERGY RX200 S8

Summary of Contents for Fujitsu PRIMERGY RX200 S8

  • Page 1: Table Of Contents

    PRIMERGY RX200 S8 System configurator and order-information guide February 2014 Contents 4x 2.5" Hot-plug HDD or SSD 8x 2.5" Hot-plug HDD or SDD Instructions Configuration diagram Configurator System software Basic unit Processor Memory Graphics Accessible drives Drive Bay for 4x /8x 2.5" HD Basic Unit Modular Raid 0/1, Raid5 for 4x 2.5"...

  • Page 2: Memory

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Instructions This document contains basic product and configuration information that will enable you to configure your system via PC-/SystemArchitect. Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.

  • Page 3: Accessible Drives

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Configuration diagram PRIMERGY RX200 S8 System unit (I) board front side Memories CPUs right side Accessible drives (V) Memory CPU1 Bay for 5,25"x 0,5" SATA-DVD (Channel A + B + C + D) Bank 1 (4 Modules) Only with option 4x 2.5"...
  • Page 4 PRIMERGY-Software Configurators and Release Lists PRIMERGY RX200 S8 Status 30-01-2014 Start PRIMERGY RX200 S8 SW Configurator 32 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM- SW is bound to HW and VMware-Software is not allowed to be ordered - VirtualCenter Management Server separately.
  • Page 5 PRIMERGY-Software Configurators and Release Lists PRIMERGY RX200 S8 Status 30-01-2014 Start PRIMERGY RX200 S8 SW Configurator 64 bit with OEM-Software without OEM-Software for PRIMERGY Server for PRIMERGY Server OEM- SW is bound to HW and For all SW products please refer to the corresponding...
  • Page 6 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Start PRIMERGY RX200 S8 Section Basic unit System unit consisting of: * 1U Housing without power supply modules (PSU has to be configured min 1x) * Fans - Redundant and hot plug system double-fans 4x for 1 CPU / 6x for 2 CPU configuration (n+1 redundancy) * SAS Backplanes for 4x or 8x 2.5"...
  • Page 7 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Interfaces at the rear: * 1x VGA (15 pins) * 3x USB 2.0 (UHCI) with 480MBit/s, no USB wakeup * 2x LAN RJ45, 1x Service-LAN RJ45 Interfaces on the front: * 2x USB 2.0 (UHCI) with 480MBit/s, no USB wakeup...
  • Page 8 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Rack version for 19'' racks with PSU included in Base Unit For an orderable basic unit one CPU = first CPU, one memory = first memory Full redundancy cannot be guaranteed for a max.
  • Page 9 3rd party racks S26361-F2735-E81 with CMA adapter Cable mgmt. arm for 1U server Cable Management Arm can - for Fujitsu PRIMECENTER S2 only be used for FTS RMKs S26361-F2735-L81 or all PRIMECENTER M1 racks with CMA adapter Cable mgmt.
  • Page 10 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Processor There are 2 processor sockets available. The first socket is always equipped with the first CPU which can be selected via configurator It is also possible to upgrade a dual-processor system later on with a second CPU Two processors with different type are not possible If 1CPU with a TDP >= 115W is used, the hot plug redundant fan kit (S26361-F1386-E120) is required.
  • Page 11 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Memory - There are 12 memory slots per CPU for max. 768GB LRDIMM (12x 64GB 8R) 192GB RDIMM (12x 16GB 2R) 64GB UDIMM (8x 8GB) on special Release only =>...
  • Page 12 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Effective Memory capacity / Rank Sparing Mode, 1 Channel populated RDIMM LRDIMM 16GB 32GB 64GB 1DPC 24GB 48GB 2DPC 12GB 28GB 56GB 112GB 3DPC 16GB 20GB 44GB 80GB 160GB Minimum one memory module or order code per CPU = first memory Unbuffered Memory (UDIMM) no SDDC (chipkill) support - one DDR3 unbuffered ECC mem.
  • Page 13 PRIMERGY RX200 S8 Status 30-01-2014 Memory Configuration PRIMERGY RX200 S8 Each CPU offers 12 Slots for DDR3 Memory Modules organised in 3 Banks and 4 Channels. If you need more than 12 Slots you have to configure the 2nd CPU.

  • Page 14: Independent Channel Mode

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 1. Independent Channel Mode required required if 2nd CPU is configured Channel C hannel Channel Channel Channel C hannel Channel C hannel Bank I Data Data Data Data Data Data...

  • Page 15: Rank Sparing Mode

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 4. Rank Sparing Mode 1-Rank Memory modules (RDIMM) required required if 2nd CPU is configured Channel C hannel Channel Channel Channel C hannel C hannel C hannel Bank I optional, same type in Channel per CPU...
  • Page 16 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Graphics Graphics Controller integrated in iRMC S4 (integrated Remote Management Controller): 1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz (1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)
  • Page 17 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Accessible drives Setup by ServerStart is supported with following configurations: no DVD, no CD: remote installation only ( PXE service & DHCP server required) built in DVD or USB DVD:...
  • Page 18 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Drive Bay for Upgrade from 4x2.5" to 8x2.5" HD Basic Unit From Base Unit S26361-K1455-V101 to Base Unit S26361-K1455-V201 Drive Bay with up to 4x 2.5" HDDs Drive Bay with up to 8x 2.5" HDDs plus one bay for DVD 8 HDD Ports are connected to a RAID Ctrl.
  • Page 19 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 VIII Section 4x / 8x 2.5" SAS / SATA Hard disk drives All combinations of SSD and SAS are possible - but not in same logical drive (RAID array) For basic units V1xx up to 4x SATA / SAS 2.5" hard disks plus ODD can be configured.
  • Page 20 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section External SAS Disk Array & Backup drives SAS RAID controller for JBOD subsystems Lose delivery options S26361-F3713-E203 S26361-F3713-L203 RAID Ctrl SAS 6G 8port external RAID Ctrl SAS 6G 8port external...
  • Page 21 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Fibre Channel A combination of Emulex and Qlogic FC / FCoE controller is not supported No mix and match of different All controllers for the connection of external FC Controllers possible.
  • Page 22 System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section Communication / Network Modular On-Board LAN is a flexible extension of a cost-optimized Motherboard 2x Gigabit (Dualport) Ethernet Contr. onboard with basic 2x Gbit LAN on-board. 5 different Upgrade-Kits are offered, which occupies a dedicated PCIe slot and...
  • Page 23 Cisco branded cable max. 2x per controller max. 2x per controller max. 2x per controller separate orderable 10Gb Ethernet cables S26361-F3989-L102 SFP+ aktives Twinax Kabel Fujitsu 2m S26361-F3989-L105 SFP+ aktives Twinax Kabel Fujitsu 5m S26361-F3989-L110 SFP+ aktives Twinax Kabel Fujitsu 10m S26361-F3873-L501...
  • Page 24 Cisco branded cable max. 2x per adapter max. 2x per adapter max. 2x per adapter separate orderable 10Gb Ethernet cables S26361-F3989-L102 SFP+ aktives Twinax Kabel Fujitsu 2m S26361-F3989-L105 SFP+ aktives Twinax Kabel Fujitsu 5m S26361-F3989-L110 SFP+ aktives Twinax Kabel Fujitsu 10m S26361-F3873-L501...

  • Page 25: System Management Products (Remoteview)

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Section System Management Products (RemoteView) iRMC S4 (integrated Remote Management Controller) onboard server management Controller with dedicated 10/100/1000 Service LAN-port and integrated graphics. Optional 10/100 Service LAN-port on front panel.

  • Page 26: Country Specific Power Cord

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 as soon as available S26361-F3776-E101 ® Cool-safe Advanced Thermal Design Restricts configuration to make 5-40° possible Feature is enabled and fixed ex factory max. 1x per system S26361-F1386-E120 Hot Plug Fan kit (2 double fans)
  • Page 27 IB HCA 56Gb 2 Kanal FDR S26361-F4533-E202 Modulare SV 800W titanium hp S26113-F615-E10 Cable powercord rack, 4m, grey T26139-Y1968-E100 Leitung Netzanschluss (USA), 1,8m, grau T26139-Y1742-E10 Serial Port Option S26361-F3120-E3 TPM Modul S26361-F3552-E1 End PRIMERGY RX200 S8 Fujitsu PRIMERGY Server 27 of 28...

  • Page 28: Change Report

    System configurator and order-information guide PRIMERGY RX200 S8 Status 30-01-2014 Change Report Date Order number Changes 2014-01-30 S26361-F5303-* New SATA SSDs added. New SAS 12G SSDs added. 2014-01-30 S26361-F5297-* 2013-12-10 S26361-F3554-E8 restricted for ATD 2013-11-29 S26361-F3837-L64 SATA DOM added Restrictions CCC Certification for China updated...

Table of Contents