Connecting The Power Adapter Ad 3110 - Fujitsu LOOX 610 Easy Manual

Operating pocket LOOX 610

Connecting the power adapter AD 3110

You can connect the power adapter directly to the Pocket PC at the DC socket.
In the following text the letters and numbers after the designations for the various cables
i
refer to the illustration Delivery scope in your "Getting Started" manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
For information on how to connect the power adapter to the cradle, please read the "Using the
cradle" chapter.
Ê
Connect the power adapter cable (F) to the DC socket of the Pocket PC (27).
Ê
Connect the power cable (F) into the power adapter AD 3110 (F).
Ê
Plug the power cable (F) into a mains outlet.
The power cable supplied conforms to the requirements of the country in which you
!
purchased your Pocket PC. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The power adapter's power cable should only be connected to a mains outlet if the Pocket
PC is connected to the power adapter.
Do not use the power adapter for other devices.
Do not use a power adapter that is not specially intended for this Pocket PC.
14
Ê
Slide the lock in the direction of the arrow
with the stylus.
A26391-K139-Z120-2-7619