Configuring Hardware Buttons; Fsc Keylock: Preventing Switch-On Via Application Buttons; Assigning Chosen Functions To The Hardware Buttons - Fujitsu LOOX 610 Easy Manual

Table of Contents

Configuring Pocket LOOX 610

Permitting sound only for certain actions

Touch Start.

Select the Settings entry in the menu.

Select the Personal tab.

Touch the Sounds & Messages symbol.

Under the heading Activate sound for you will find a list of actions that are usually assigned acoustic

signals. You can select yourself which applications or functions are to be accompanied by sounds.

Touch in an empty control and selection box to mark it.

Touch in a marked control and selection box to remove the marking.

Touch OK (navigation bar) to confirm your setting.

Configuring hardware buttons

By default, your Pocket LOOX 610 starts up if the Suspend button and an application button are

pressed.

In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is

pressed.

Touch Start.

Select the Settings entry in the menu.

Touch the Buttons symbol on the Private tab.

Select the FSC KeyLock tab.

Mark the Application buttons locked option.

You will find further information in the help file on your Pocket LOOX 610.

The buttons of your Pocket PC are assigned certain functions such as running programs. However,

you can change these default settings and assign the buttons the functions of your choice.

Touch Start.

Select the Settings entry in the menu.

Touch the Buttons symbol on the Private tab.

A list of the hardware buttons and the assigned programs or functions appears. The four application

buttons appear in the list twice. This is because you can assign different applications to these

buttons for short and for long keystrokes.

Mark the button in the list for which you want to change the assignment.

Select the program you want to assign to this button from the list below it.

Touch OK (navigation bar) to confirm your setting.

A26391-K139-Z120-2-7619

Table of Contents