Table of Contents
Advertisement
Pocket LOOX 610 in mobile use
The Pocket LOOX 610 is equipped with a powerful battery that allows you to work for several hours
without a connection to a power supply. When you're on the road your Pocket PC is supplied with
power by the integrated battery. At your home or office you can recharge the battery in the cradle.
You can also take along the power adapter and connect your Pocket PC directly to an electrical
outlet to recharge the battery when you're on the go.
In this chapter you'll learn how to charge the battery and use it most efficiently for mobile operation.
In addition, you'll find important information on transporting your Pocket LOOX 610 and explanations
on what you should watch when travelling with your Pocket PC in this chapter.
Using battery
Charging the battery
The battery is not charged at the time of delivery. Therefore, install the battery on your Pocket
LOOX and charge it for 12 hours before the first mobile use.
You have two ways of doing this:
Ê
Connect the Pocket PC directly to an electrical outlet with the power adapter.
Ê
Connect the cradle to an electrical outlet via the power adapter and place the Pocket PC in the
cradle.
In both cases you can work with the Pocket PC during charging. This extends the charging time
slightly.
During charging the LED (24) flashes green. When the battery is fully charged, the LED
i
lights continuously green.
Charging battery in cradle
In the following text the letters and numbers after the designations for the various cables
i
refer to the illustration Delivery scope in your "Getting Started" manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
Ê
Connect the power adapter cable (F) to the DC socket (7) of the cradle (8).
Ê
Connect the power cable (F) into the power adapter AD 3110 (F).
Ê
Plug the power cable (B) into a mains outlet.
Ê
Place the Pocket PC in the cradle (C).
A26391-K139-Z120-2-7619
37
Advertisement
Table of Contents
