Handset Settings; Starting The Programming Mode; Setting The Ringer For External Calls; Setting The Ringer For Internal Calls - AEG Spirit 100 User Manual

Handset Settings

Starting the programming mode

Entering the programming mode is achieved by pressing the programming –
key P (hold it for 2 seconds). Each further time that the P – key is pressed,
the following settable parameter appears. All settings can be modified, one after
the other, by running through the complete cycle.
As soon as the requested value of a parameter has been reached, it is con-
firmed automatically by pressing the P – key.
Pressing or holding the "hang-up" – key
handset leave the programming and jump back to the stand-by mode. When no
buttons are pressed during programming mode, the handset also returns to
stand-by mode after for 15 seconds.

Setting the ringer for external calls

1. Display after the first setup:
or later, in stand-by mode, e.g.:
In stand-by, hold the programming key P for 2 seconds. The symbol P
2.
blinks, the display is emptied.
Press P, the symbols P and f appear continuously and "EXT" blinks.
3.
4. The actual volume (left) and melody (right) for external calls appear; e.g.:
5. Press the scroll-keys
numeric key for choosing the melody (1 – 5). Example for ringer switched
off (melody 1):
Press P to save the input values.
6.
7. The program automatically continues with the setting of the ringer for inter-
nal calls, as described in the next chapter.
8. The handset returns to stand-by mode by pressing the "hang-up" – key

Setting the ringer for internal calls

Remark:
This setting is only possible after having made the setting described in the pre-
vious chapter.
AEG Spirit 100 05.06 gc_de
Q
S T
for changing the volume (0 – 5) and press a
in programming mode, makes the
-1-
-1-
-3-
-OFF-
00;00
18;35
-1-
-1-
Q
.
15