Did Addressing - NEC Univerge SV8300 Manual

Hide thumbs Also See for Univerge SV8300:

Table of Contents

DID Addressing

General Description

This feature allows incoming ISDN-PRI calls to terminate to stations, Attendant Console, Automated Atten-

dant, etc., based on the Called Party number. Direct Inward Dial trunks will be terminated to programmed des-

tinations without Attendant assistance.

Operating Procedure

No manual operation is required.

Station Application

Not applicable

Service Conditions

1. If the network is notiﬁed that the destination station for the DID call is busy or a connection-controlled sta-

tion, the network gives the calling station a Busy Tone. (This depends upon call forwarding services being

activated.)

2. If the called station is nonexistent, the DID call can be routed to the Attendant Console, to another desig-

nated station, or can receive Reorder Tone.

3. Refer to the Features and Speciﬁcations Manual (Business/Hotel) for more details of DID service.

UNIVERGE SV8300 Features and Speciﬁcations Manual (ISDN/Q-SIG)

NWA-033632-001, Issue 1

Page 17

Table of Contents

Show Quick Links

Table of Contents