Calling/Connected Line Id Presentation (Clip/Colp)/ Calling/Connected Name Id Presentation (Cnip/Conp) - NEC Univerge SV8300 Manual

Calling/Connected Line ID Presentation (CLIP/COLP)/ Calling/Connected Name ID Presentation (CNIP/CONP)

Calling/Connected Line ID Presentation (CLIP/COLP)/
Calling/Connected Name ID Presentation (CNIP/CONP)
General Description
In between Q-SIG networks, this feature allows calling or called party information, to be displayed on the Mul-
tiline Terminal LCD. CLIP/COLP conforms to ETS 300 173 and IS-11572 network. CNIP/CONP conforms to
ETS 300 238 and IS-11572 network.
• Calling Line Identification Presentation (CLIP): Calling party number (ID) is displayed on the called party's
Multiline Terminal LCD.
Connected Line ID Presentation (COLP): Called party number (ID) is displayed on the calling party's Mul-
•
tiline Terminal LCD.
Calling Name Identification Presentation (CNIP): Calling party information (Name ID) is displayed on the
•
called party's Multiline Terminal LCD.
Connected Name Identification Presentation (CONP): Called party information (Name ID) is displayed on
•
the calling party's Multiline Terminal LCD.
This feature is also available when interworking with a CCIS interface.
Operating Procedure
No manual operation is required.
Service Conditions
1. Name ID service is not available when:
• a tandem office is not provided with this feature or Calling Name Display - CCIS.
• a call is routed through a signaling interface other than Q-SIG or CCIS.
Note: Available with IS-11572 interface.
2. The routes to the offices not provided with this feature must be separated from the routes to the offices pro-
vided with this feature.
3. While hearing Ring Back Tone, Name ID of the called party is displayed on the calling party's Multiline
Terminal LCD. Note that the display is not changed even if the call is transferred using such features as Call
Forwarding - All Calls.
4. When a call is transferred to another office using a forwarding feature such as Call Forwarding - All Calls
- Outside, Name ID of the terminated station is displayed on the calling party's Multiline Terminal LCD.
5. Even if the called party is in busy or lockout state, the called party's Name ID is displayed on the calling
party's Multiline Terminal LCD. However, when the called party is in Do Not Disturb state, Name ID is not
displayed.
6. When a call is transferred using Consultation Hold and Voice Call, Name ID of the calling party is not dis-
played on the transferred party's Multiline Terminal LCD.
7. This service cannot be used in conjunction with the ISDN Information Transfer service.
Page 34
UNIVERGE SV8300 Features and Specifications Manual (ISDN/Q-SIG)
NWA-033632-001, Issue 1