Table of Contents
Advertisement
2 Mount the dome cover
① Clean the dust and dirt on the dome cover.
② Align the position marks (3 locations) on the camera unit and
dome cover, followed by pressing in directly to mount the cover.
③ Tighten the dome cover fastening screw.
.
Ensure that the silica gel (provided) has been inserted
Note
before mounting the dome cover.
Be sure to secure the dome cover firmly. If it is not firmly
secured, the cover can drop or the humidity inside the
camera can increase and fog up the interior of the cover.
When the cover is removed again after mounting the dome
cover, the field angle may changed. If the field angle is
changed, re-adjust the focus and the field angle.
Ensure that the fall prevention wire of the dome cover is not
caught between the dome cover and the base. Failure to do
so may prevent the dustproof and rainproof functions from
working properly.
Dome cover
Dome cover protective sheet
Installation
Position alignment
mark (x3)
E-29
Advertisement
Table of Contents
