Advertisement
Available languages
Available languages
Stay alert, watch
what you
are doing
and use common
sense when
operating
a power
tool. Do not use tool while tired
or under the influence of drugs,
alcohol or medication.
A moment
of inattention
while operating
power tools may result in serious
personal injury.
Dress properly.
Do not wear
loose clothing
or jewelry. Contain
long hair. Keep your hair,
clothing and gloves away from
moving parts. Loose clothes,
jewelry, or long hair can be
caught in moving parts.
Keep fingers
away from trig-
ger when
not driving
fasteners
to avoid
accidental
firing.
Do not overreach.
Keep proper
footing and balance at all times.
Proper footing and balance
enables better control of the tool
in unexpected
situations.
Use safety equipment.
Always
wear eye protection.
Dust mask,
nonskid safety shoes, hard hat,
or hearing protection
must be
used for appropriate
conditions.
Do not use a ladder
or unsta-
ble support.
Stable footing on
a solid surface enables better
control of the tool in unexpected
situations.
Store idle tools
out of reach of
children
and other
untrained
persons.
Tools are dangerous
in
the hands of untrained
users.
OPERATION
Check operations
of the
workpiece
contact
mechanism
frequently.
Do not use the tool
if the workpiece contact mecha-
nism is not working correctly
as
accidental driving of a fastener
1.
2.
3.
4.
5.
may result. Do not interfere with
the proper operation of the work-
piece contact mechanism.
Use only the size and type
of fasteners
designated
in
the Specifications
list in this
manual,
Keep the tool and its handle
dry, clean and free from oil
and grease. Always use a
clean cloth when cleaning.
Never use brake fluids, gasoline,
petroleum-based
products,
or
any strong solvents to clean
your tools. Following this rule
will reduce the risk of loss of
control and deterioration
of the
enclosure
plastic.
Do not use oxygen,
combus-
tible gases or bottled
gases
as a power source for this tool
as tool will explode, possible
causing
injury or death.
Do not use with an air com-
pressor
which
can potentially
exceed
200 psi as tool may
burst, possibly causing injury.
Always
disconnect
air supply:
Before making adjustments
When servicing the tool
When clearing a jam
When tool is not in use
When moving to a different work
area, as accidental actuation
may occur, possibly causing
injury.
Advertisement
