Bosch LTC 2380 User Manual page 19

Digital Video Quad Processor
Installing a Double Unit
The package for each Video Quad contains a binding plate that you use to connect two units
together. To connect two units you must connect one (1) binding plate to the bottoms of the
units and one (1) binding plate to the tops of the units. The connected units fit into a 19-inch
rack unit.
1.
2.
3.
4.
5.
Bosch Security Systems, Inc.
Turn the units over so that the front panels are towards you.
Remove the rubber feet from the bottom of both units. These feet may interfere with
installing other hardware in the rack mount.
Determine which unit will server as the right-side unit and which as the left-side unit.
Remove the left, front screw (A) from the bottom of the right unit (B).
A
Figure 2.9 Position of Screw to Remove from the Right Unit
Remove the right, front screw (C) from the bottom of the left unit (D).
Figure 2.10 Position of Screw to Remove from the Left Unit
B
D
User's Guide
Unpacking | en 15
C
F.01U.090.110 | 3.0 | 2010.04