Bosch LTC 2380 User Manual page 35

Digital Video Quad Processor
Live Video Processor Operations
This section details the advanced operations that you can perform with the LTC 2382/90
video processor.
Displaying an Image in Full Screen Mode
Press the 1, 2, 3, or 4 key to manually select a camera input and to display the image in the
Full-screen mode.
Displaying Images in Quad Mode
Press the Return key to display all four camera inputs on the monitor. Each quadrant displays
the video from its respective camera and are separated by a border. See Section Color
Adjustment, page 27 to customize the color of the border. If camera titles have been applied,
the monitor displays:
–
–
–
–
Displaying Images Sequentially
Press the SEQ/ALM key to activate the sequential switching function. See Section Configuring
the Camera Sequence Setup, page 21 to customize the sequence list and dwell times.
Press the SEQ key to start video sequencing. The default sequence displays the cameras in
the order 1-2-3-4-QUAD. The quad screen is displayed after camera 4. Each camera remains on
screen for the programmed dwell period, unless its dwell is set to SKIP, in which case it is
deleted from the sequencing list. Press the SEQ key or any camera key to cancel the
Sequence mode.
Playing Recorded Video
The unit allows you to view recorded VCR/DVR images. The images that the VCR/DVR records
depends on the REC OUT mode setting (see Section Configuring the REC OUT Mode,
page 25.). If the unit is in the QUAD ONLY mode, then the recording device records all four
quadrants. If the unit is in the SAME AS MONITOR mode, then the recording device records
only the images that the unit displays on the monitor.
For example, if the unit is programmed to sequence each camera's image in Full-screen mode
and the REC OUT mode is set to SAME AS MONITOR, then the recording device records only
the Full-screen image from each camera in sequence.
The following procedures detail viewing images recorded in the QUAD ONLY mode and the
SAME AS MONITOR mode.
Bosch Security Systems, Inc.
the Camera 1 title in the lower right-hand corner of the quadrant.
the Camera 2 title in the lower left-hand corner of the quadrant.
the Camera 3 title in the upper right-hand corner of the quadrant.
the Camera 4 title in the upper left-hand corner of the quadrant.
User's Guide
Unpacking | en 31
F.01U.090.110 | 3.0 | 2010.04