LG FREEZER Owner's Manual page 42

6. Procedure to install
2. Insert the hinge base
(If the thickness of the cabinet is 20mm, do not install the hinge base
3. Lean the refrigerator backward and then fix the depth adjust bracket
spots) of the refrigerator door by using the hinge screws
If there is any excess length on the power cord, hang the excess up on a holder, or hook so that it
cannot be crushed or damaged by the product when it is installed into the cabinet.
4. Draw the power cable through the back of the cabinet.
Be careful that the power cord is not trapped beneath the
refrigerator as you install it into the cabinet. The cord may
be crushed and damaged resulting in a fire hazard. Hang it
on the rear holder if possible.
5. Insert the refrigerator into the cabinet so that the
end of the hinge stand
the cabinet.
Caution must be taken not to jam your hands between
refrigerator and cabinet when inserting refrigerator into
cabinet.
into the hinges (two spots). (See Figure 1)
align to the front part of
.)
at the bottom (two
as shown at the figure.
The top of the cabinet (floor view)