LG FREEZER Owner's Manual page 46

6. Procedure to install
13. Insert the height adjusting nuts
screw, and then place the top bracket
adjusting screw of the top of the refrigerator door. Use the height adjusting nut to adjust
the height of the integrated door panel and set the level. (See Figure 10)
Be careful to align the top
bracket holes onto the
adjusting screws to
prevent the integrated
door panel from falling
and causing personal
injury or damage to the
integrated door panel.
14. Check the place where the hole of the depth adjusting bracket
hole of the refrigerator door (Figure 11), and fix the depth adjusting bracket
left/right (four spots) of the integrated door panel with the wood screw
The door hole is located at
1050mm from the door floor.
(two spots at the bottom) onto the height adjusting
of the integrated door panel onto the height
is aligned with the
to the
. (Figure 12)