LG FREEZER Owner's Manual page 45

6. Procedure to install
10. Place the paper jig
furniture door. (See Figure 7)
- Place the reference line of the paper jig at 1595mm from the floor of the cabinet.
- If the integrated door panel is long, place the reference line of the paper jig at
1595mm plus 'A' from the floor of the furniture.
11. Mark two points in the paper Jig
integrated door panel. (See Figure 8)
Before fixing with the wood screw
double check the indicated point is located
in an accurate position.
12. After removing the paper jig
bracket of the integrated door panel by
using the wood screw
top two holes lined up to the marked spots
(from the paper jig) on the integrated door
panel. (See Figure 9)
- If you need to re-position top bracket
due to incorrect positioning. Align
top two holes to remarked position
(from jig) but use alternate holes to
fix to assure screws hold firmly.
on the reference line of the paper jig at the rear side of the
A
on the
,
, fix the top
(4 places) with the