Silvercrest KH 2267 Operating Instructions Manual page 10

KH2267_68_Mikroanlage_EN.qxd
KH 2267 / 2268
10. Connecting
Loudspeakers
Both loudspeaker leads have a cinch plug at each end.
➩
Connect the cinch plug of the right-hand loudspeaker to
the right-hand loudspeaker connection
➩
Connect the cinch plug of the left-hand loudspeaker to
the left-hand loudspeaker connection
Additional audio appliance
You can connect other audio appliances such as e. g. a
mini-disc player or a TV to the micro-system.
➩
Connect the cinch plug (right-hand channel) of the audio
appliance to the right-hand connection for the audio
5!
appliance .
➩
Connect the cinch plug (left-hand channel) of the audio
appliance to the left-hand connection for the audio
5)
appliance .
Subwoofer
➩
Connect the control cable
connection of the control cable
Connect and align the medium wave antenna
For the medium wave (MW) radio reception you must coonect
an additional antenna to the micro-system.
➩
Take the supplied antenna out of the packaging.
➩
Unwind the connecting cable from the antenna.
➩
Erect the ring until you hear it click into place in the
antenna base.
➩
Push the antenna plug into the connection of the
medium wave antenna
There is a AM antenna for the radio reception of the
USW transmitter on the micro-system.
➩
Carefully roll out the dipole antenna fully, so that the
micro-system has a good reception.
➩
If the reception is insufficient, change the position of
the dipole antenna.
Micro-system
➩
Connect the power plug of the power cord
230 V ~ /50 Hz wall socket.
11. Fold out the display for horizontal operation.
You can fold out the display to be able to read it more easily.
➩
If you wish to fold out the display, please press at the top
e
of the display .
The display will fold out.
➩
If you wish to fold the display in again, please press the
e
display down.
The display will engages into the housing again.
31.03.2006 13:31 Uhr Seite 6
5@
.
4(
.
4!
of the micro-system to the
4^
on the subwoofer.
3(
.
4*
to a
12. Switching on and off
Switching on
➩
Switch the power switch
to ON (I) position.
The micro-system is in standby mode and the standby light
j
lights up red.
Switching off
➩
Switch the power switch
OFF (0) position.
Play mode
➩
In standby mode, please press the ON/OFF switch
micro-system.
13. Selecting the appliance/sound source.
You can choose between the following sound sources:
• CD
• AUX
• CARD-USB
• Tuner (radio)
➩
Press the FUNCTION button
sound source apears on the display.
14. Adjusting the volume
You can adjust the volume via the remote control and the
micro-system.
Remote control
➩
To increase the volume press the button INCREASE
l
VOLUME .
➩
Press the button until the desired volume is reached.
➩
To reduce the volume press the button REDUCE VOLUME
➩
Press the button until the desired volume is reached.
The set volume will appear
Micro-system
➩
To increase the volume turn the volume control
➩
To reduce the volume, turn the volume control
clockwise.
The set volume will appear
Subwoofer
➩
To increase the volume, turn the volume control
towards MAX.
➩
To reduce the volume, turn the volume control
towards MIN.
Switching the loudspeakers to mute (Mute)
➩
To switch the micro-system to mute, presss the button
SWITCH LOUDSPEAKER TO MUTE
The volume flashes on the display.
➩
To continue listening press the button SWITCH
LOUD-SPEAKER TO MUTE
- 6 -
4&
on the back of the subwoofer in-
4&
on the back of the subwoofer to
k
on the
o 2@
or , until the desired
e
on the display
s
clockwise.
s
anti-
e
on the display
4$
4$
3&
.
3&
once again.
3^
.