Adjusting The Sound; Using Headphones - Silvercrest KH 2267 Operating Instructions Manual

KH2267_68_Mikroanlage_EN.qxd

15. Adjusting the sound

You can adapt the sound quality to the respective type of
music by means of the sound setting. You can choose
between the following settings:
• Pop
• Jazz
• Pass
• Classic
• Rock
➩
Press the SOUND SELECTION button
desired sound appears on the display
If you adjust the sound setting while playing, the sound will
change immediately.

16. Using headphones

You can connect stereo heaphones to the micro-system with a
3.5 mm jack plug. The headphone socket
the front of the micro-system. When you have connected the
headphones, the loudspeakers are disconnected and you will
hear the sound via the headphones only.
➩
Push the jack plug on the headphones into the headphone
4%
socket .
17. Setting the clock
You can only adjust the clock in standby mode.
➩
Press the PROGRAMMING BUTTON
pressed for approx. three seconds.
➩
In order to adjust the 24-hour or 12-hour mode, please
press the button
➩
To store the setting press the PROGRAMMING BUTTON
3@
or
The hours indication flashes on the display.
➩
To set the hours press the buttons
h 3!
resp. .
➩
To store the setting press the PROGRAMMING BUTTON
3@
or .
The minute indication will flash on the display.
➩
To set the minutes press the buttons
h 3!
resp. .
➩
Press the PROGRAMMING BUTTON again
The time is set and active.
31.03.2006 13:31 Uhr Seite 7
2) r
or , until the
e
.
4%
is situated on
y 3@
or and keep it
g 2% h 3!
resp. or resp. .
g 2%
resp. or
g 2%
resp.
y 3@
or .
18. Setting the alarm function (timer)
You can program your micro-system to wake you up. For this
purpose you can set the desired waking time, the sound source
and the volume. The micro-system will then switch on and off
according to the set time. You can be woken up by the radio
or to the sound of a CD.
➩
If you wish to be woken by a CD, please insert the desired
CD into the CD compartment
➩
If you wish to be woken by the radio, please select a radio
station by means of the BAND SELECTION BUTTON
2!
resp.
.
Setting the switch-on time
➩
Press the TIMER button
.
The hour indication for the switch-on time flashes on the display.
➩
To set the hours for the switch-on time press the button
g 2%
resp. or
➩
To store the setting press the TIMER
again.
The minute indication for the switch-on time flashes on the
display
➩
To set the minutes press the button
h 3!
resp. .
Setting the switch-off time
➩
To enter the hours for the switch-off time press the TIMER
u 3$
resp. button.
The hours indication flashes on the display.
➩
To adjust the hours press the button
h 3!
resp. .
➩
To store the setting press the TIMER
again.
The minute display for the switch-off time flashes on the display.
➩
To set the minutes press the buttons
y h 3!
resp. .
Setting the sound source
➩
u
Press the TIMER
The sound source indication flashes on the display.
➩
y
Select the desired sound source by pressing buttons
g 2%
resp. or
or Adjusting the volume
➩
u
Press the TIMER
The volume indication flashes on the display.
➩
Select the desired volume using buttons
h 3!
resp. .
Storing the settings
➩
u
Press the TIMER
The alarm function settings will be shown on the display one
after another. A clock symbol indicates that the alarm
function is active.
- 7 -
KH 2267 / 2268
q
.
u 3$
resp.
h 3!
resp. .
u 3$
resp. button
g 2%
resp.
g
resp.
u 3$
resp. button
g
resp.
3$
resp. button.
h 3!
resp. .
3$
resp. button.
g
resp.
3$
resp. button.
i
or
2%
or
2%
or
2%
or