Connection Via Vga; Connection Via Hdmi - Silvercrest KH 6515 Operating Instructions Manual

KH6515_16_A4_C_V3_EN.qxd 23.08.2006
KH 6515/6516

6.5. Connection via VGA

This connection variant is only possible with very high grade
televisions, LCD/Plasma screens or Video projectors For this
connection variant the television must be equiped with a
VGA input and two unoccupied audio cinch sockets. Check
with the instruction manual of the corresponding playback
device to see if this connections variant is available. It is possible
that additional playback device settings must be implemented.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• a VGA cable (not supplied) These can be obtained from
your dealer.
In order to connect the DVD player via VGA...
• Connect the jack inscribed with VGA using a VGA cable
to the corresponding socket on the television.
• Secure both plugs of the VGA cable with the screws.
• Insert the white audio cinch cable plug into the cinch socket
inscribed "L" on the rear panel of the DVD player.
• Then insert the white plug at the other end of the audio
cinch cable into the left channel audio socket on the tele-
vision.
• Insert the red audio cinch cable plug into the cinch socket
inscribed "R" on the rear panel of the DVD player.
• Then insert the red plug at the other end of the audio
cinch cable into the right channel audio socket on the
television.
• For playback select the matching channel on your tele-
vision Check with the television's instruction manual on
how you can set the AV channel.
• In the OSD menu select the menu Video/Video
output/VGA.
Ô
On this topic see also capital 8.3
"Video settings: Video output."
14:19 Uhr Seite 8

6.6. Connection via HDMI

This connection variant is only possible with very high grade
televisions, LCD/Plasma screens or Video projectors
Check with the instruction manual of the corresponding playback
device to see if this connections variant is available. It is possible
that additional playback device settings must be implemented.
For this connection variant you will need:
• a HDMI cable (Not supplied); These can be obtained from
In order to connect the DVD player via HDMI...
• Connect the jack inscribed with "HDMI" using a HDMI
• For playback select the matching channel on your tele-
• In the OSD menu select the menu Video/Video
Ô
- 8 -
your dealer.
cable to the corresponding socket on the television.
vision Check with the television's instruction manual on
how you can set the AV channel.
output/HDMI.
On this topic see also capital 8.3
"Video settings: Video output."