Glossary / Key Word Index - Silvercrest KH 6515 Operating Instructions Manual

KH6515_16_A4_C_V3_EN.qxd 23.08.2006
C
Using the television's (or Video projector's) instruction
manual check to see if current settings to the television
(or Video projector) are necessary in order to use the
DVD player with the television.
No sound
A
Check to see if the television and/or DVD player are
currently switched to mute.
B
Check to see if all connections cables between the DVD
player and currently connected audio components are
firmly plugged into the corresponding sockets.
C
Check whether the settings in the OSD menu match the
connection option you have used to connect the audio
components to the DVD player.
Ô
For this refer to chapter 7 "Connecting Audio components
to the DVD player.
D
Using the television's instruction manual check to see if
current settings to the television are necessary in order
to use the DVD player with the television.
E
Using the instructions manual of a currently connected
audio component check to see if settings to the compo-
nent are necessary in order to use it with the DVD player.
F
If you ...
Ú
have connected the DVD player to a stereo television and
have not connected an audio component to the DVD player
or
Ú
have connected a Dolby Prologic compatible audio compo-
nent via the analogue stereo outlet (via cinch cables to the
cinch sockets L and R) of the DVD player:
Check to see if you have selected the option Large in the
OSD Menu under the Sub menu option Front LS.
No 4:3 or 16:9 image
A
Consult the operating manual of the television to determine
which image format the television supports.
B
Check whether the settings in the OSD menu match the
available image format of the television.
Remote control does not function
A
Check to see that the remote control batteries are inser-
ted into the battery compartment according to the correct
polarity.
B
Check whether the batteries in the remote control are
dead and replace both batteries, if necessary.
14:20 Uhr Seite 25
C
D
Playback language / subtitle language does not match the
settings in the OSD menu
The playback language / subtitle language configured in
the OSD menu is not available on the inserted disc.
One or more functions cannot be activated
The selected function may not be available for all DVDs/VCDs/
S-VCDs. If you attempt to execute a function that is not avai-
lable, the symbol
None of the buttons on the device or on the remote control
function / other malfunctions
A
B
Ô
Contact one of our service partners in your area if ...
Ú
Ú
Ô

15. Glossary / Key Word Index

What are DVDs, VCDs and S-VCDs?
DVDs
DVD is short for "Digital Versatile Disc". DVDs are used to
store audio and video data; they exist in the sizes 8 cm and
12 cm (diameter). With a storage capacity many times greater
than that of CD-Rs/CD-RWs, DVDs offer up to eight hours of
playback time for the audio and video data they contain.
- 25 -
Make sure that there are no obstructions between the
remote control and the DVD player.
When using the remote control position yourself not
more than five metres from the DVD player.
is displayed on the television screen.
Switch the DVD player off by pressing the ON/OFF button.
Wait ten seconds and then press the ON/OFF button again
to switch on the DVD player once more.
If the problem still persists: Set the DVD player back to its de-
fault settings.
For this refer to chapter 8.6 "Misc settings".
the indicated malfunction cannot be resolved as described
or
something other than the indicated malfunction occurs
For this refer to chapter 16 "Important Warranty notes".
KH 6515/6516