Step 7 Install Software Nec Express5800/Ft Series Offers - NEC N8800-164F User Manual

Step 7 Install Software NEC Express5800/ft Series offers

Install the software provided by NEC Express5800/ft series by the following procedures.
ft Server Control Software
1. Select [VMware ESX 4.0] in the bootloader (Grub) window and press Enter. When starting
ESX completes, [VMware ESX 4.0.0 – build - 261974] is displayed.
2. Press ALT + F1 to switch the console windows.
3. Login as a root user.
Account: root
Password: **** (configured upon installation)
4. Set the install DVD of ft control software 3.1.2 for VMware vSphere4 Update2.
5. Execute the install script.
# opt/ft/sbin/ft-install
All input should remain to be default.
"ftadmin" can be used in SSH connection etc.
Be sure to specify a password for the ftadmin user.
After inputting the password for the ftadmin user, the message below prompting to update
the CPU firmware may be displayed. If displayed, enter "NO" so as not to update the CPU
firmware.
Updating the CPU firmware will take about 10 minutes and should not be
interrupted. Do you want to update the firmware now?
Enter Yes to update now or NO to update later:[YES]
The message prompting to update the BMC firmware is also displayed. However, it is not
necessary to update the BMC firmware.
After installation completes, the prompt asking whether to reboot the OS is displayed. Then,
eject the install DVD of ft control software 3.1.2 for VMware vSphere4 Update2 and enter
"YES" to reboot the OS.
Report table of ft Server Control Software.
1. Select [VMware ESX 4.0] in the bootloader (Grub) window and press Enter. When starting
ESX completes, [VMware ESX 4.0.0 – build - 261974] is displayed.
2. Press ALT + F1 to switch the console windows.
3. Login as a root user.
Account: root
Password: **** (configured upon installation)
4. Set the install DVD of ft control software 3.1.2 for VMware vSphere4 Update2.
ESX Setup 4-35