4. Multiscreen Playback Picture
1. Operate the VTR in playback mode.
2. Confirm that the LED on the VTR/CAM button is lit. If
the LED is not lit, press the VTR/CAM button so that the
LED on the VTR/CAM button lights.
3. Press the MULTISCREEN SELECT button to select
multiscreen pattern (4-, 9- or 16-segment screen).
Note: 16-segment screen is not available for WJ-FS109.
<WJ-FS116>
<WJ-FS109>
1
2
3
4
4-SEGMENT SCREEN
11
16-SEGMENT SCREEN
(Only for WJ-FS116)
4. Each time the MULTISCREEN SELECT button is
pressed, the multiscreen changes as follows:
WJ-FS116: 4 9 16 4 screen segments
WJ-FS109: 4 9 4 screen segments
Notes:
• This button does not function when recording.
• When ON is selected for QUAD SHIFT on the MON-
ITOR OUTPUT SETUP menu, pressing this button
changes the screen as follows:
WJ-FS116: 4A 4B 4C 4D 9 16 screen seg-
ments
WJ-FS109: 4A 4B 9 screen segments
• The 4A screen is a multiscreen with compressed
pictures of channels 1 through 4, the 4B of chan-
nels 5 through 8, the 4C of channels 9 through 12,
and the 4D of channels 13 through 16.
28
VTR
MULTI SCREEN
SELECT
VTR
MULTI SCREEN
SELECT
1
2
4
5
7
8
9-SEGMENT SCREEN
1
2
5
6
3
4
7
8
9
10
13
14
12
15
16
5. Still Multiscreen Playback Picture
1. Repeat the procedures described above for Multi-
screen playback picture.
2. Press the STILL button so that the LED of STILL lights
up.
STILL
3. Press the CAMERA SELECT buttons 1-16 (9) to freeze
the displayed picture. STILL blinks in the display.
4. To cancel the still picture, press the respective CAM-
ERA SELECT buttons or STILL button again.
3
6
9
STILL