Tuning Channels (Automatic Channel Programming) - Panasonic TU-PTA500U Operating Instructions Manual

Tuning channels
Automatically searches and adds receivable channels in the installed area and / or CATV
signals to the program.
Channel tuning cannot be performed when the MAIN picture is not receiving a TV broadcast (tuning is not possible).
1
Press the MENU button to display the MENU screen and select SETUP.
2
CH
VOL ACTION
CH
3
CH
ACTION
VOL
CH
4
CH
ACTION
VOL
CH
5
CH
ACTION
VOL
CH
Channels will automatically advance until all channels have been scanned. Channel numbers with a video
signal present will turn blue which indicates stored in the Channel Scan Memory.
6
Press to select YES.
Notes:
•
When buttons are pressed with AUTO PROGRAM running, this unit will return to normal viewing. (Channels searched
up to this point are added.)
•
After AUTO PROGRAM is finished, the lowest channel number added will be received.
•
When there are no receivable channels, channel 69 is displayed (channel 125 for cable TV).
20
(Automatic channel programming)
Press to select PROGRAM CHANNELS.
VOL
Press to display the PROGRAM CHANNELS.
Press to select MODE.
Press to select TV or CABLE.
VOL
Press to select AUTO PROGRAM.
VOL
Press to display the confirmation screen.
Press to select YES.
VOL
Press to run AUTO PROGRAM.
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CHANNELS
LOCK
CLOSED CAPTION
VIDEO
PAGE ACTION SELECT
EXIT
PROGRAM CHANNELS
MODE TV CABLE
AUTO PROGRAM
MANUAL PROGRAM
CHANGE SELECT
EXIT
AUTO PROGRAM
Activate
"AUTO PROGRAM"?
YES NO
CHANNEL
EXIT
AUTO PROGRAM
IN "AUTO PROGRAM"
59
CHANNEL
MENU
STOP