Panasonic TU-PTA500U Operating Instructions Manual page 31

When the Position Left " " button is pressed
H-POS
When the Position Left " " button is pressed
H-SIZE
When the Position Left " " button is pressed
V-POS
When the Position Left " " button is pressed
V-SIZE
Flickering and distortion can be eliminated by using the Position Left " " or Right " " button to
CLOCK PHASE
carry out adjustment.
Note:
Adjustment details of each input signal (frequency) for PC input signal modes are memorized separately.
Helpful Hint (
While the PICTURE POS./SIZE display is active, if either the NORMAL button on the remote control is pressed at any
time or ACTION button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
Adjusting PICTURE POS./SIZE (PC input mode)
Normalization)
/
NORMAL
NORMALIZE
When the Position Right " " button is pressed
When the Position Right " " button is pressed
When the Position Right " " button is pressed
When the Position Right " " button is pressed
31