Table of Contents
Advertisement
Memory Link Feature
To recall DTMF from memory,
Enter the number you wish to dial.
1
Press Options softkey and select Memory Link. The M
2
character appears.
Enter the 2-digit Phonebook Location number for the DTMF
3
string you want to send.
Enter additional DTMF tones or phone numbers as needed
4
or repeat steps 2 and 3 as needed.
Press Send to dial the number.
5
After the call connects, press Send to transmit each DTMF
6
string.
Calling Card Calling
The MobileAccess™ T250 phone supports up to three Calling Cards, with
the access number, phone number and card number sequences used by
major Calling Card services.
Setup
To set up the Calling Card feature,
1
Press
Select 2 Calling Cards.
2
Enter Security Code and press OK softkey. If the Security
3
Code is accepted as correct, press Setup softkey in the next
screen. (If you already have three Calling Cards stored, Set-
up will not appear on the screen.)
Enter the Calling Card name, up to 32 characters. (See Enter-
4
ing Text, page 34.)
Select one of the following sequences of numbers to be sent:
5
• Access number>phone number>card number
(including PIN)
• Access number>card number (including PIN)>phone
number
• Prefix number>phone number>card number
The screen prompts you to enter each number in your se-
6
quence and press OK softkey. A screen will display indicating
that your Calling Card is stored.
To exit the menu, press left softkey or End/Back key.
7
✱
28
and select 4 Preferences, 2 Call Setup.
See Calling Card Calling in the Call Setup menu, page 45.
Advertisement
Table of Contents
