Philips Fax Machine Overview page 17

The intelligent fax switch enables you to phone and fax
from the same telephone connection and use additional
devices. The fax switch separates fax and voice messages.
For example, it can receive fax messages silently, i.e.
without ringing to avoid causing a disturbance.
The operating modes S and M for day and night
operation allow you to decide on different modes during
the day and at night, how often the machine should ring
prior to receipt of faxes or before the answering machine is
turned on.
Example:
During daytime it is assumed that calls should ring. After a
set time the fax reception is turned on or messages can be
left on the (internal or external) answering machine. At
night it is assumed that disturbances are minimised. Faxes
are then received silently and calls ring more quietly.
You may change-over the operating mode between S and
M of your fax machine automatically using the timer
function U. The integral clock ensures that your machine
is changed over at 10 pm to M and at 6 am to S. Of
course you may adjust these times to suit your own
requirements. The display allows you to check the current
operating status. You change-over between S and M by
briefly pressing the key S until the display shows the
required symbol.
0, 1, 2, 3, 4, 5, 6,
7, 5/2
0, 1, 2, 3, 4, 5,
Select function 31 (Day) by pressing MENU and numbers
3 and 1. Confirm with OK.
Select number of rings with </> before your answering
device will be activated.
Confirm your entry with OK.
Now enter the number of ringing signals, after which the
automatic fax-switch should accept the call and separate
faxes from voice messages. Although the caller will continue
to hear slightly different ringing tones after this time,
charges will already accrue.
Confirm your entry with OK.
Using </>, determine the ringer volume when receiving a
call. Press OK.
Select with </> if the caller should be heard while leaving
a message.
Confirm with OK.
To activate mode M select MENU 32 (Night) and
repeat steps 2 to 8.
SM SM SM
SM SM
Select function 31 (Day) by pressing MENU and numbers
3 and 1. Confirm with OK.
Using </>, set the total number of rings before the fax
reception commences.
Confirm your entry with OK.
Now enter the number of ringing signals after which the
fax-switch should accept the call and separate faxes from
voice messages. Although the caller will continue to hear
slightly different ringing tones after this time, charges will
already accrue.
Confirm your entry with OK.
Using </>, determine the ringer volume when receiving a
call. Press OK.
Confirm with OK.
To activate mode M select MENU 32 (Night) and repeat
steps 2 to 7.
0, 1, 2, 3, 4, 5,
6, 7
0, 1, 2, 3, 4, 5,