Silvercrest CRB-532 Instructions Manual page 44

"TAVOL": Volume for traffic announcements
The "TAVOL" function enables an adjustment of playback volume when the device is turned on according to individual
preferences.
To change the device's volume for traffic announcements, press the control dial
function will appear. Press the control dial
device's volume for traffic announcements by turning the dial. Turning to the right increases the volume for traffic
announcements; turning to the left reduces the volume for traffic announcements. The volume for traffic announcements can be
set for between 0-45. Here 0 = no sound and 45 = maximum volume of the device.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
During a traffic announcement, it is possible to adjust the volume to the current requirements at any time by means of the
control dial .
"EON": Automatic station switching for traffic announcements
The "EON" function is an additional RDS service. If the current programme does not offer any traffic announcements, EON
automatically switches to the traffic announcements on another programme. After the end of the announcement, the device
switches back to the previously heard station. The readiness for traffic announcements "TA" has to be activated for this.
To activate the "EON" function, press the control dial
the control dial until you get to the menu item "EON". Here you will have the option of activating (ON) or deactivating (OFF)
the function by turning the dial. If the "EON" function is activated, "EON" will appear on the display.
The setting is saved either when the desired value is confirmed by pressing the control dial
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display
"REC": Settings for the recording function
This menu item gives you the option of selecting between WMA and MP3 coding while recording. The recording function is
described in detail below under 0.
To reach the menu, press the control dial
the control dial until you reach the menu item "REC". Here you will have the option of selecting between "WMA" and "MP3" by
turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
110
until you reach the menu item "TAVOL". Here you have the option of setting the
until menu level 2 is reached. The "INVOL" function will appear. Press
until menu level 2 is reached. The "INVOL" function will appear. Now briefly press
until menu level 2 is reached. The "INVOL"
or through automatic storage (do
or through automatic storage (do
or through automatic storage (do