Silvercrest CRB-532 Instructions Manual page 51

Note:
A mobile phone with the activated option "visible to everyone" also allows third parties to see your device and potentially
access it.
Making calls
Make sure that your telephone is paired with the device. Now press the telephone button
indicate "Voice DIAL" and a signal tone. Clearly and distinctly speak the name of the call recipient into the microphone. As soon
as your phone has found the corresponding number, the connection is established and the conversation can begin.
Finishing the call
To end a conversation or an attempted call, please press the telephone button
Transferring / taking a call to / from the Bluetooth car radio
During a phone call, you have the option of transferring this call to the Bluetooth car radio or receiving it from the car radio. The
transfer is followed by the audio input and output of the conversation through the car speakers or the car microphone. The
handover is followed by the audio input and output of the conversation through the car speakers or the car microphone.
To take over a call from the Bluetooth car radio, press the telephone button
transferred to the mobile phone and you can continue speaking even if you are no longer within the reception range of the
Bluetooth car radio.
To transfer a telephone conversation to the Bluetooth car radio, press the telephone button
possible that longer pressure is required on telephone button
and you can continue the conversation via the audio components (microphone and speakers).
Note:
A telephone conversation can only be transferred when both devices have already been paired at one point and the mobile
phone is set to the mode "visible to everyone".
In the table below, please find a quick overview and additional functions.
briefly.
for two seconds. Now the conversation is
). Now the conversation is transferred to the Bluetooth car radio
for 2 seconds. The display will
for 2 seconds (in some cases it is
117