Silvercrest CRB-532 Instructions Manual page 62

Problem Cause
The inserted CD The CD was inserted with the printed side
cannot be played. to the bottom.
The CD has too many scratches.
The CD is dirty.
The device temperature is too high.
The CD contains incorrect or faulty data.
Poor radio reception Reception conditions are poor.
The radio reception The AF function is activated.
is choppy or
frequently
interrupted.
The radio receives The REG function is activated.
only a few stations
The music is only The balance and/or fader settings are
played back by one faulty.
speaker group.
NO FILE The CD does not meet the CompactDisc
standard or does not contain any MP3 /
WMA files.
Not all MP3/WMA Wrong coding of the files that are not being
tracks are played played back.
back.
Too many files are stored on the CD.
128
Solution
Flip the CD over and try again.
Create another CD from the original or have the CD
repaired.
Clean the CD (without cleaning agents, just a lint-free
cloth).
Reduce the volume of the device.
The CD cannot be used with this device. Please burn your
audio data onto a separate data storage medium and try
again.
Change your location to achieve better reception.
Deactivate the AF function (see section 17.2).
Deactivate the REG function
Check the balance or fader settings (see section 17.1).
Create a CD that meets the CompactDisc standard.
Recode the files.
A maximum of 1000 tracks can be administered per CD.
Create a CD with fewer than 1000 tracks.