Direct Command Operation Using The Handset - Panasonic KX-TG8280FX Operating Instructions Manual

TG8280FX(e).book Page 39 Tuesday, September 11, 2007 1:52 PM
2
{^}/{V}: "Erase Message" i
#
3
{^}/{V}: "Erase All" i #
L y and z is displayed.
4
{^}/{V}: "Yes" i # i {ih}
Erasing all messages for the desired
line(s)
Base unit
Press {LINE SELECT} repeatedly to
select the desired line(s), then press
{ERASE} 2 times.
Handset
1
" (middle soft key) i I i
#
2
Press R repeatedly to select the
desired line(s).
3
{^}/{V}: "Erase Message" i
#
4
{^}/{V}: "Erase All" i #
5
{^}/{V}: "Yes" i # i {ih}
Calling back using the
handset (Caller ID
subscribers only)
If caller information was received for the
call, you can call the caller back while
listening to a message.
1
Press " during playback.
2
{^}/{V}: "Call Back" i #
3
{C}
L Automatically uses the line you
set in line selection mode (page
15) to call back. When the line
selection mode is set to "Auto",
the indicated line (c or d) is
used for the call. If the indicated
line is already being used or you
want to select the other line, press
P or Q.
Answering System Features
I
Editing the number before calling
back
1
Press " during playback.
2
{^}/{V}: "Edit and Call" i
#
3
Edit the number.
4
{C}
L If the indicated line is already
being used or you want to select
the other line, press % then
press P or Q.
Direct command
operation using the
handset
You can operate the answering system
by pressing dial keys, rather than
navigating through the menus.
To use the following commands:
" (middle soft key) i I i #
i Press R repeatedly to select the
desired line(s) if necessary.
Key Operation
Repeat message
{1}
(during playback)
Skip message (during
{2}
playback)
Enter the "Settings"
{3}
menu
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting
{7}{6}
message
Stop (recording,
{9}
playback)
*1
39