Connection Wizard - Siemens Gigaset DL500A User Manual

Then "Register a handset?" is shown in the display again (see above/page 26).
¤
Press the display key
the steps listed above with this additional handset.
§No§
Press to close the registration wizard and start the connection wizard.
Please note
u
By default, the base is assigned the internal name INT 1 and the internal
number 1.
u
The base assigns the lowest free internal number to the handset
(possible numbers: 2–7). The handset's internal name is shown in the display
e.g., INT 2. This means that the handset has been assigned the internal
number 2.
u
The internal numbers and names can be changed.

4. Connection wizard

Is started on Gigaset DX800A all-in-one and Gigaset DX600A ISDN.
Using the connection wizard, you can assign the previously configured connec-
tions to the internal parties as receive or, if applicable, as send connections. Internal
parties are the base, the registered handset, the answering machine of the base and
the connected FAX device, if applicable.
u
Receive connections are numbers on which you can be called. Incoming calls
are only diverted to those internal parties (end devices) for whom the associated
connection is assigned as a receive connection.
u
Send connections are the numbers that are sent to the called party. The net-
work provider calculates charges based on the send connections. You can assign
each internal party a number or the associated connection as a send connec-
tion.
u
Each connection (number) of your phone can be both a send as well as a receive
connection. You can assign each connection to several internal parties as a send
and/or receive connection. It may only be assigned to an answering machine as
a receive connection.
Standard assignment
All connections of the base are assigned as receive connections to the base, the reg-
istered handsets and the local answering machine 1 at registration/start-up.
When the phone is connected to the ISDN, the first MSN in the configuration
(standard name MSN1) is assigned to the devices as a send connection. If no MSNs
are configured, the main number of the ISDN connection is used.
If the Gigaset DX800A all in one is connected to the analogue fixed line, the fixed
line number is assigned to the devices as a send connection.
§Yes§
if you wish to register another handset and perform
First steps
27