Stopping Engine; Procedure - Yamaha 9.9D Owner's Manual

Operation
3. Move the gear shift lever quickly and firm-
ly from neutral to reverse.
Remote control models
1. Check that the tilt lock lever is in the lock
position.
2. Pull up the neutral interlock trigger (if
equipped) and move the remote control
lever quickly and firmly from neutral to re-
verse.
EMU27820

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU27832

Procedure

1. Push and hold the engine stop button un-
til the engine comes to a complete stop.
25
2. After stopping the engine, tighten the air
vent screw on the fuel tank cap and set
the fuel cock lever or knob to the closed
position, if equipped.
3. Disconnect the fuel line if you are using
an external fuel tank.
ZMU02301