Operation
5.
Slightly tilt the outboard motor up until the
tilt support bar automatically returns to
the free position.
6.
Slowly lower the outboard motor to the
normal position.
EMU28190
Cruising in other conditions
Cruising in salt water
After operating in salt water, wash out the
cooling water passages with fresh water to
prevent them from becoming clogged with salt
deposits.
NOTE:
For cooling system flushing instructions, see
page 32.
Cruising in turbid water
Yamaha strongly recommends that you use
the optional chromium-plated water pump kit
if you use the outboard motor in turbid (mud-
dy) water conditions.
31
ZMU02048