D-Link DCS-1000 Manual page 16

The default settings are as follows:
Default IP – 192.168.0.20
Subnet Mask – 255.255.255.0
Default Gateway – 0.0.0.0
Assign Automatically Using
If your network is using RARP, BOOTP or DHCP server you can click
"Assign Automatically Using" and click on "RARP", "BOOTP" or
"DHCP" . Under this setting DCS-1000 will automatically assign an IP
address from RARP, BOOTP or DHCP server. Each time the DCS-1000
starts up be sure the RARP, BOOTP or DHCP server is setup as assign a static
IP to your DCS-1000.
If your application requires direct connection from an ADSL modem through
DCS-1000's RJ-45 LAN port and you also have an ISP PPPoE account. Click
on "PPPoE" option and enter the Service Name, User ID and Password into
the respective fields.
DCS-1000 will get an IP address from the ISP each time DCS-1000 starts up.
DNS IP Address:
DNS (Domain Name System) server is an Internet service that translates
domain names (ie. www.dlink.com) into IP addresses (ie. 192.168.0.20). The
DNS IP address can be received from your ISP. Enter at least one DNS IP
Address
LED Control:
The LED control allows user to setup the LED illumination as desired. This
feature provides the flexibility when surveillance activity is ON.
There are three options as follows:
l
Normal –
l
OFF –
l
Dummy –
Power - Steady On of the LED indicator.
LAN - Steady On of the LED indicator. When LAN activity
is present the LED indicator will flash steadily.
Power - LED indicator is off
LAN – LED indicator is off
15