I/O Connector - D-Link DCS-1000 Manual

I/O Connector

I/O Connector Definition for DCS-1000
An 8-pole connector is provided for auxiliary IO connections to the DCS-1000.
The IO connector provides the physical interface for 2 digital output and 2
digital input that is used for connecting a diversity of external alarm devices to
the DCS-1000 such as IR-Sensor and alarm relay.
The digital input is used for connecting external alarm devices and once
triggered images will be taken and e-mailed.
The supported transistor output can give a maximum of DC 5V to the
externally connected alarm devices and once triggered the current will activate
the devices.
In 11 In 11 & In 12 is a pair for digital input. It works at voltage 5V
In 12
In 21 In 21 & In 22 is a pair for digital input. It works at voltage 5V
In 22
Out 1 + Out 1 - & Out 1 + is a pair for digital out. The out put voltage is 5
Out 1 - V and maximum current is 100 mA
Out 2 + Out 2 - & Out 2 + is a pair for digital out. The out put voltage is 5
Out 2 - V and maximum current is 100 mA
69