Intercom Calls - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Dial an Intercom Call While
On-hook:
1. Press the Intercom button.
2. Dial a station number.
3. Lift the handset when the
called station is answered.
4. Hang up when the call is
completed.

INTERCOM CALLS

You can dial a station without lifting the handset.
You will hear dial tone when you press the button, and the Intercom LED
will flash green at the in-use rate.
If the called station is idle:
If the system is set for Voice First Signaling, you will hear a single
tone and should then make a voice announcement. (After dialing the
station number, you can dial 1 to change to the other signaling
method, Tone Signaling.)
If the system is set for Tone Signaling, you will hear repeated ring
tones and you should wait for the call to be answered. (After dialing
the station number, you can dial 1 to change to the other signaling
method, Voice First Signaling.)
To leave a Message Waiting Indication at the called station, dial 7.
If you receive busy tone:
To set Automatic Call Back (ACB), dial 4.
To activate Busy Override if the called station is not equipped for Off-
hook Call Announce (OCA), dial 2.
To activate OCA: With Voice First Signaling and the called station is
equipped for OCA, dial 2. With Tone Signaling and the called station
is equipped for OCA, dial 21.
Dial 3 to enter the station's conversation (Executive Override, system
programmable option).
To leave a Message Waiting Indication at the called station, dial 7.
The LED will continue to flash green. Calling from a speakerphone to a
telephone in the Handsfree Answerback mode is not recommended
because the characteristics of the two are not matched.
The LED will turn off. Press the Spkr button to disconnect the call if you
did not lift the handset.
FEATURE OPERATION
2-3