Call Forward To Toshiba Vp Voice Systems - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Cancel the Voice Mail I.D.
Code:
1. Press the Intercom button.
2. Dial 6 5 6.
3. Press the Redial button.
4. Press the Spkr button.
To Forward Calls to the Toshiba
VP System:
1. Press the desired Call
Forward button.
. . . or . . .
Press the Intercom button,
then enter a Call Forward
access code.
2. Dial the VP System number.
3. Press the Call Forward button
or the Spkr button.
3-2
NOTE: Steps 1 ~ 5 are required for the initial storage of the VM I.D. code
to the VP system. Once programmed, these digits remain in memory
until changed. Repeat Steps 1 ~ 5 to change the code.
You will hear intercom dial tone after you press the button.
You will hear confirmation tone.
The I.D. code will be cancelled.

CALL FORWARD TO TOSHIBA VP VOICE SYSTEMS

By registering Call Forward to the Toshiba VP System on your telephone,
information about the call will automatically be provided to the VP
system, so that the caller does not have to re-enter the last few digits of
the extension number that they have initially dialed.
The LED associated with the button will flash after you press the button.
You will hear confirmation tone after entering the access code.
NOTE: Following is a list of Call Forward access codes:
Call Forward-All Calls: 601
Call Forward-Busy: 602
Call Forward-No Answer: 603
Call Forward-Busy/No Answer: 604
See your system administrator for the correct voice mail intercom
number. After dialing, you will hear confirmation tone if you dialed an
access code.
The Call Forward LED will light steady red if you have the Call Forward
button.
TOSHIBA VP INTEGRATION