Call Forward Display; To Set Call Forward; Station-To-Station Message Waiting - Toshiba strata DK8 Installation Instructions Manual

4. Press the Redial button.
5. Press the Spkr button
You will hear a confirmation tone.
When your station has call forward
set, the LCD displays as shown
(NN = the forward-to number).
1. Call Forward-All Calls
2. Call Forward-Busy
I
CF-BUSY TO: STNN
JAN 26 TUE 01:43 I
3. Call Forward-No Answer
[iiiY?zz]
4. Call Forward-Busy/No
Answer
[Z]
5. Call Forward-Fixed
[::,'::':,:"i:T::]
CALL FORWARD DISPLAY
TO SET CALL FORWARD
When any type of call forward is initiated, the "CALL FORWARD To"
prompt displays on the lower row of the LCD.
Press InteKom 6 0 I+ N N + Spkr
(or Cell Frwd All Cells + N N + Cell Frwd All Cells).
Press Intercom 6 0 2 + N N + Spkr
(or Cell Frwd Busy + N N + Cell Frwd Busy)
Press Intercom 6 0 3 + N N + Spkr
(or Cell Frwd No Answer + N N + Cell Frwd No Answer).
Press Intercom 6 0 6 + N N + Spkr
(or Cell Frwd Busy NAns + N N + Cell Frwd Busy NAns)
Press the Cell Frwd to: button.
NOTES:
1. To cancel call forward, press Intercom 6 0 1 Spkr (or press the
call forward button used to set call forward).
2. If call forward is set:
n Central Office (CO) lines that ring at your station on/y will
forward (CO lines that ring into more than one station will not
forward).
W CO line calls transferred to your station will forward.
W intercom calls will forward.
W Call forward redirects the station hunt feature.
STATION-TO-STATION MESSAGE WAITING
To Use Station-to-Station
Message Waiting:
1. Lift the handset.
2. Dial the desired station
number.
If there is no answer (busy or DND), press the Msg button (or dial 7).
This causes the Msg LED on the called station to flash. The called
station's LCD displays the calling station's number.
3. The called station user
presses the Intercom and
Msg buttons to return the
call.
When the returned call is answered, the flashing Msg LED will turn off
4. To clear the Msg LED from
the called station, press the
Meg button.
5. To clear the Msg LED from
the calling station, press the
Intercom button, dial the
station number and press the
Msg button twice (or 7 7).
NOTE:
Up to four message waiting displays may be stored on the LCD. The
station number in the left-most position wi// be called when the Msg
button is pressed. To rotate the station numbers, press the Scroll
button. The fourth message is reserved for the Message Center.
2-2 2-3