See Program - Toshiba strata DK8 Installation Instructions Manual

PROGRAMMlNGPROCEDURES-INSTRUCTIONS/SYSTEMRECORDS
SECTION 100-816-302
MARCH1993
PROGRAM 78
CO LINE SPECIAL RINGING ASSIGNMENTS
DISA/IMDU/NIGHT RINGING OVER EXTERNAL PAGE
SELECT = Feature Number
Enter Feature Number
Specify CO lines by setting
1, 2 or 5.
Enter Code
button/LEDs as defined by the
Number 1-3.
table below. All LEDs with an
"X" should be lit when finished.
NOTE: Shaded areas apply to DK16 only
CO Lines
Feature Code
Number
Feature Description
(ButtonlLEDs)
01 02 03 04 05 06 07 08
(01)(02)(03)(04)(05)(06)(07)(08
1 3
Ring Over External Page4 during NIGHT mode
1 DISA CO Line during DAY Mode 3
2 2 DISA CO Line during DAY2 Mode 3
3
DISA CO Line during NIGHT Mode3
1 Ring IMDU Maint. Modem during DAY Mode
5 2 Ring IMDU Maint. Modem during DAY2 Mode
-
3
Ring IMDU Maint. Modem during NIGHT Mode
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized dafa leaves all LEDs off.
3. See Programs 10-1, 15,
60,40,41,48, and 03 (code 92) for complete DISA programming (for DISA, the
K4RCU PCB must be installed in the Base Unit).
4. See Program 77-1
for night ringing configuration.
5. DISA lines are assigned to
DK8
Port 10 and
DK16
Port
20
in
Program
30 (Account Codes) and
Program
41 (outgoing CO line restriction) and Program 48.
2-90