Toshiba strata DK8 Installation Instructions Manual page 333

PROGRAMMINGPROCEDURES-INSTRUCTIONWYSTEMRECORDS
SECTION lOO-816-302
MARCH1993
PROGRAM44A
EMERGENCYBYPASSOFFORCED/VERIFIEDACCOUNTCODES
SELECT = 51,52, or 53 J DATA = 3 or 4 digit emergency
to sei emergency
number 1,2 or 3
Emergency Number 1:
Elm Lxlmmn
Emergency Number 2:
Em non0
Emergency Number 3:
EIEI no00
-r I
telephone number
To enter blanks,
Press: Button/LED 01
Example
911 = Initialized Data (Note 2)
SELECT = _-J L DATA = 3 or 4-digit telephone number
NOTES:
1. The emergency telephone numbers assigned in this program will be sent out the CO line immediately when
dialed; they will bypass the Forced/Verified Account Code dialing restriction.
2. If CO lines are behind PBX or CENTREX, program the PBWCENTREX outside trunk access code: Example:
"9". A pause is automatically inserted following the first 9. See Programs 42-O and42-I to assign the CO lines
and access codes for behind PBWCENTREX operation. Also, if the system CO lines are behind CENTREx/
PBX, the CENTREXYPBX trunk access codes must be programmed in front of the emergency telephone
number. Example: If the CENTREXYPBX access code is "9': then enter 9911 in Program 44-51.
3. If Verified Account Codes assigned in Program 69 conflict (are the same) with emergency telephone numbers
assigned in Program 44A, Program 44A has priority.
4. This feature is for use with Forced (Verified or Nonverified) Account Codes, but not with ABR and DISA. It also
does not override Toll Restriction; emergency numbers must be allowed using system Toll Restriction tables
per normal Toll Restriction programming procedures.
5. Program 44B is related to Toll Restriction andisplaced with the other Toll Restriction programs in this chapter.
2-83